Bash Style Guide
This guide outlines how to write bash scripts with a style that makes them safe
and predictable. This guide is written by Dave Eddy (https://daveeddy.com) as
part of the YSAP (You Suck at Programming) series ysap.sh (https://ysap.sh) and
is the working document for how I approach bash scripting when it comes to
style, design, and best-practices.
▌ Preface
This guide will try to be as objective as possible, providing reasoning for why
certain decisions were made. For choices that are purely aesthetic (and may
not be universally agreeable) they will exist in the Aesthetics section
below.
Though good style alone won't ensure that your scripts are free from error, it
can certainly help narrow the scope for bugs to exist. This guide attempts to
explicitly state my style choices instead of implicitly relying on a sense or a
"vibe" of how code should be written.
▌ Aesthetics
┃ Tabs / Spaces
Tabs.
┃ Columns
Not to exceed 80.
┃ Semicolons
Avoid using semicolons in scripts unless required in control statements (e.g.,
if, while).
┌─────────────────────┐
│ │
│ # wrong │
│ name='dave'; │
│ echo "hello $name"; │
│ │
│ # right │
│ name='dave' │
│ echo "hello $name" │
│ │
└─────────────────────┘
The exception to this rule is outlined in the Block Statements section below.
Namely, semicolons should be used for control statements like if or while.
┃ Functions
Don't use the function keyword. All variables created in a function should
be made local.
┌───────────────────────────────────────────────────────────┐
│ │
│ # wrong │
│ function foo { │
│ i=foo # this is now global, wrong depending on intent │
│ } │
│ │
│ # right │
│ foo() { │
│ local i=foo # this is local, preferred │
│ } │
│ │
└───────────────────────────────────────────────────────────┘
┃ Block Statements
then should be on the same line as if, and do should be on the same line
as while.
┌──────────────────────────────────────────────────┐
│ │
│ # wrong │
│ if true │
│ then │
│ ... │
│ fi │
│ │
│ # also wrong, though admittedly looks kinda cool │
│ true && { │
│ ... │
│ } │
│ │
│ # right │
│ if true; then │
│ ... │
│ fi │
│ │
└──────────────────────────────────────────────────┘
┃ Spacing
No more than 2 consecutive newline characters (ie. no more than 1 blank line in
a row).
┃ Comments
No explicit style guide for comments. Don't change someones comments for
aesthetic reasons unless you are rewriting or updating them.
────────────────────────────────────────────────────────────────────────────────
▌ Bashisms
This style guide is for bash. This means when given the choice, always prefer
bash builtins or keywords instead of external commands or sh(1) syntax.
┃ test(1)
Use [[ ... ]] for conditional testing, not [ .. ] or test ...
┌───────────────┐
│ │
│ # wrong │
│ test -d /etc │
│ │
│ # also wrong │
│ [ -d /etc ] │
│ │
│ # correct │
│ [[ -d /etc ]] │
│ │
└───────────────┘
See BashFAQ031 (http://mywiki.wooledge.org/BashFAQ/031) for more information
about these.
┃ Sequences
Use bash builtins for generating sequences
┌───────────────────────────────┐
│ │
│ n=10 │
│ │
│ # wrong │
│ for f in $(seq 1 5); do │
│ ... │
│ done │
│ │
│ # wrong │
│ for f in $(seq 1 "$n"); do │
│ ... │
│ done │
│ │
│ # right │
│ for f in {1..5}; do │
│ ... │
│ done │
│ │
│ # right │
│ for ((i = 0; i < n; i++)); do │
│ ... │
│ done │
│ │
└───────────────────────────────┘
- YSAP052 (https://ysap.sh/v/52/)
- YSAP053 (https://ysap.sh/v/53/)
┃ Command Substitution
Use $(...) for command substitution.
┌─────────────────────┐
│ │
│ foo=`date` # wrong │
│ foo=$(date) # right │
│ │
└─────────────────────┘
- YSAP022 (https://ysap.sh/v/22/)
┃ Math / Integer Manipulation
Use ((...)) and $((...)).
┌──────────────────────────┐
│ │
│ a=5 │
│ b=4 │
│ │
│ # wrong │
│ if [[ $a -gt $b ]]; then │
│ ... │
│ fi │
│ │
│ # right │
│ if ((a > b)); then │
│ ... │
│ fi │
│ │
└──────────────────────────┘
Do not use the let command.
┃ Parameter Expansion
Always prefer parameter expansion over external commands like echo, sed,
awk, etc.
┌─────────────────────────────────────────────────┐
│ │
│ name='bahamas10' │
│ │
│ # wrong │
│ prog=$(basename "$0") │
│ nonumbers=$(echo "$name" | sed -e 's/[0-9]//g') │
│ │
│ # right │
│ prog=${0##*/} │
│ nonumbers=${name//[0-9]/} │
│ │
└─────────────────────────────────────────────────┘
- YSAP026 (https://ysap.sh/v/26/)
- YSAP056 (https://ysap.sh/v/56/)
┃ Listing Files
Do not parse ls(1) (http://mywiki.wooledge.org/ParsingLs), instead use
bash builtin functions to loop files
┌──────────────────────────────────┐
│ │
│ # very wrong, potentially unsafe │
│ for f in $(ls); do │
│ ... │
│ done │
│ │
│ # right │
│ for f in *; do │
│ ... │
│ done │
│ │
└──────────────────────────────────┘
- YSAP001 (https://ysap.sh/v/1/)
┃ Determining path of the executable (__dirname)
Simply stated, you can't know this for sure. If you are trying to find out the
full path of the executing program, you should rethink your software design.
See BashFAQ028 (http://mywiki.wooledge.org/BashFAQ/028) for more information
For a case study on __dirname in multiple languages see my blog post
Dirname Case
Study (http://daveeddy.com/2015/04/13/dirname-case-study-for-bash-and-node/)
┃ Arrays and lists
Use bash arrays instead of a string separated by spaces (or newlines, tabs,
etc.) whenever possible
┌───────────────────────────────────┐
│ │
│ # wrong │
│ modules='json httpserver jshint' │
│ for module in $modules; do │
│ npm install -g "$module" │
│ done │
│ │
│ # right │
│ modules=(json httpserver jshint) │
│ for module in "${modules[@]}"; do │
│ npm install -g "$module" │
│ done │
│ │
└───────────────────────────────────┘
Of course, in this example it may be better expressed as:
┌────────────────────────────────┐
│ │
│ npm install -g "${modules[@]}" │
│ │
└────────────────────────────────┘
... only if the command supports multiple arguments and you are not interested
in catching individual failures.
- YSAP020 (https://ysap.sh/v/20)
- Arrays explained in 7 minutes (https://www.youtube.com/watch?v=asHJ-xfuyno)
┃ read builtin
Use the bash read builtin whenever possible to avoid forking external
commands
Example
┌───────────────────────────────────────────────┐
│ │
│ fqdn='computer1.daveeddy.com' │
│ │
│ IFS=. read -r hostname domain tld <<< "$fqdn" │
│ echo "$hostname is in $domain.$tld" │
│ # => "computer1 is in daveeddy.com" │
│ │
└───────────────────────────────────────────────┘
────────────────────────────────────────────────────────────────────────────────
▌ External Commands
┃ GNU userland tools
The whole world doesn't run on GNU or on Linux; avoid GNU specific options
when forking external commands like awk, sed, grep, etc. to be as
portable as possible.
When writing bash and using all the powerful tools and builtins bash gives you,
you'll find it rare that you need to fork external commands to do simple string
manipulation.
- YSAP029 (https://ysap.sh/v/29/)
┃ Useless Use of Cat Award
Don't use cat(1) when you don't need it. If programs support reading from
stdin, pass the data in using bash redirection.
┌─────────────────────┐
│ │
│ # wrong │
│ cat file | grep foo │
│ │
│ # right │
│ grep foo < file │
│ │
│ # also right │
│ grep foo file │
│ │
└─────────────────────┘
Prefer using a command line tools builtin method of reading a file instead of
passing in stdin. This is where we make the inference that, if a program says
it can read a file passed by name, it's probably more performant to do that.
- UUOC (http://www.smallo.ruhr.de/award.html)
────────────────────────────────────────────────────────────────────────────────
▌ Style
┃ Quoting
Use double quotes for strings that require variable expansion or command
substitution interpolation, and single quotes for all others.
┌───────────────────────────────────────┐
│ │
│ # right │
│ foo='Hello World' │
│ bar="You are $USER" │
│ │
│ # wrong │
│ foo="hello world" │
│ │
│ # possibly wrong, depending on intent │
│ bar='You are $USER' │
│ │
└───────────────────────────────────────┘
All variables that will undergo word-splitting must be quoted (1). If no
splitting will happen, the variable may remain unquoted.
┌───────────────────────────────────────────────────────────────────────────┐
│ │
│ foo='hello world' │
│ │
│ if [[ -n $foo ]]; then # no quotes needed: │
│ # [[ ... ]] won't word-split variable expansions │
│ │
│ echo "$foo" # quotes needed │
│ fi │
│ │
│ bar=$foo # no quotes needed - variable assignment doesn't word-split │
│ │
└───────────────────────────────────────────────────────────────────────────┘
1. The only exception to this rule is if the code or bash controls the variable
for the duration of its lifetime. For example code like this:
┌────────────────────────────────────┐
│ │
│ printf_date_supported=false │
│ if printf '%()T' &>/dev/null; then │
│ printf_date_supported=true │
│ fi │
│ │
│ if $printf_date_supported; then │
│ ... │
│ fi │
│ │
└────────────────────────────────────┘
Even though $printf_date_supported undergoes word-splitting in the if
statement in that example, quotes are not used because the contents of that
variable are controlled explicitly by the programmer and not taken from a user
or command.
Also, variables like $$, $?, $#, etc. don't required quotes because they
will never contain spaces, tabs, or newlines.
When in doubt; quote all expansions (http://mywiki.wooledge.org/Quotes).
- YSAP021 (https://ysap.sh/v/21/)
┃ Variable Declaration
Avoid uppercase variable names unless there's a good reason to use them.
Don't use let or readonly to create variables. declare should only
be used for associative arrays. local should always be used in functions.
┌──────────────────────────┐
│ │
│ # wrong │
│ declare -i foo=5 │
│ let foo++ │
│ readonly bar='something' │
│ FOOBAR=baz │
│ │
│ # right │
│ i=5 │
│ ((i++)) │
│ bar='something' │
│ foobar=baz │
│ │
└──────────────────────────┘
┃ shebang
Bash is not always located at /bin/bash, so use this line:
┌─────────────────────┐
│ │
│ #!/usr/bin/env bash │
│ │
└─────────────────────┘
Unless you’re intentionally targeting a specific environment (e.g. /bin/bash
on Linux servers with restricted PATHs).
┃ Error Checking
cd, for example, doesn't always work. Make sure to check for any possible
errors for cd (or commands like it) and exit or break if they are present.
┌─────────────────────────────────────────────────────────────┐
│ │
│ # wrong │
│ cd /some/path # this could fail │
│ rm file # if cd fails where am I? what am I deleting? │
│ │
│ # right │
│ cd /some/path || exit │
│ rm file │
│ │
└─────────────────────────────────────────────────────────────┘
┃ Using set -e
Don't set errexit. Like in C, sometimes you want an error, or you expect
something to fail, and that doesn't necessarily mean you want the program
to exit.
This is a controversial opinion that I have on the surface, but the link below
will show situations where set -e can do more harm than good because of its
implications.
- BashFAQ105 (http://mywiki.wooledge.org/BashFAQ/105)
┃ Using eval
Never.
It opens your code to code injection and makes static analysis impossible.
Almost every use-case can be solved more safely with arrays, indirect expansion,
or proper quoting.
────────────────────────────────────────────────────────────────────────────────
▌ Common Mistakes
┃ Using {} instead of quotes.
Using ${f} is potentially different than "$f" because of how word-splitting
is performed. For example.
┌─────────────────────────────────────────────────┐
│ │
│ for f in '1 space' '2 spaces' '3 spaces'; do │
│ echo ${f} │
│ done │
│ │
└─────────────────────────────────────────────────┘
yields:
┌──────────┐
│ │
│ 1 space │
│ 2 spaces │
│ 3 spaces │
│ │
└──────────┘
Notice that it loses the amount of spaces. This is due to the fact that the
variable is expanded and undergoes word-splitting because it is unquoted. This
loop results in the 3 following commands being executed:
┌─────────────────┐
│ │
│ echo 1 space │
│ echo 2 spaces │
│ echo 3 spaces │
│ │
└─────────────────┘
The extra spaces are effectively ignored here and only 2 arguments are passed
to the echo command in all 3 invocations.
If the variable was quoted instead:
┌─────────────────────────────────────────────────┐
│ │
│ for f in '1 space' '2 spaces' '3 spaces'; do │
│ echo "$f" │
│ done │
│ │
└─────────────────────────────────────────────────┘
yields:
┌────────────┐
│ │
│ 1 space │
│ 2 spaces │
│ 3 spaces │
│ │
└────────────┘
The variable $f is expanded but doesn't get split at all by bash, so it is
passed as a single string (with spaces) to the echo command in all 3
invocations.
Note that, for the most part $f is the same as ${f} and "$f" is the same
as "${f}". The curly braces should only be used to ensure the variable name
is expanded properly. For example:
┌───────────────────────────────────────────┐
│ │
│ $ echo "$HOME is $USERs home directory" │
│ /home/dave is home directory │
│ $ echo "$HOME is ${USER}s home directory" │
│ /home/dave is daves home directory │
│ │
└───────────────────────────────────────────┘
The braces in this example were the difference of $USER vs $USERs being
expanded.
┃ Abusing for-loops when while would work better
for loops are great for iteration over arguments, or arrays. Newline
separated data is best left to a while read -r ... loop.
┌───────────────────────────────────────────┐
│ │
│ users=$(awk -F: '{print $1}' /etc/passwd) │
│ for user in $users; do │
│ echo "user is $user" │
│ done │
│ │
└───────────────────────────────────────────┘
This example reads the entire /etc/passwd file to extract the usernames into
a variable separated by newlines. The for loop is then used to iterate over
each entry.
This approach has a lot of issues if used on other files with data that may
contain spaces or tabs.
1. This reads all usernames into memory, instead of processing them in a
streaming fashion.
2. If the first field of that file contained spaces or tabs, the for loop would
break on that as well as newlines.
3. This only works because $users is unquoted in the for loop - if
variable expansion only works for your purposes while unquoted this is a good
sign that something isn't implemented correctly.
To rewrite this:
┌────────────────────────────────┐
│ │
│ while IFS=: read -r user _; do │
│ echo "$user is user" │
│ done < /etc/passwd │
│ │
└────────────────────────────────┘
This will read the file in a streaming fashion, not pulling it all into memory,
and will break on colons extracting the first field and discarding (storing as
the variable _) the rest - using nothing but bash builtin commands.
- YSAP038 (https://ysap.sh/v/38/)
────────────────────────────────────────────────────────────────────────────────
▌ References
- YSAP (https://ysap.sh)
- BashGuide (https://mywiki.wooledge.org/BashGuide)
- BashPitFalls (http://mywiki.wooledge.org/BashPitfalls)
- Bash Practices (http://mywiki.wooledge.org/BashGuide/Practices)
▌ Get This Guide
- curl style.ysap.sh - View this guide in your terminal.
- curl style.ysap.sh/plain - View this guide without color in your terminal.
- curl style.ysap.sh/md - Get the raw markdown.
- Website (https://style.ysap.sh) - Dedicated website for this guide.
- GitHub (https://github.com/bahamas10/bash-style-guide) - View the source.
▌ License
MIT License
> generated 2025-05-24T21:15:27Z (git hash 10ac791)